.. Author: gislite .. Title: Zoom Level
Zoom Level
==========
Leaflet uses latitude, longitude, and “zoom level.”
A lower zoom level means that the map shows the entire continent, while
a higher zoom level means that the map can display the details of the
city.
In order to understand how the zoom level works, we first need to make a
basic introduction to geodesy.
Shape of the earth
------------------
Let’s look at a simple map that is locked at level 0:
::
var map = L.map('map', {
minZoom: 0,
maxZoom: 0
});
var positron = L.tileLayer('http://{s}.basemaps.cartocdn.com/light_all/{z}/{x}/{y}.png', {
attribution: cartodbAttribution
}).addTo(map);
map.setView([0, 0], 0);
.. raw:: html
Please note that the “whole earth” is just a 256-pixel wide, 256-pixel
image:
.. raw:: html
Be clear: the earth is not a square. More precisely, the shape of the
earth is like a strange potato, which can be approximated as something
similar to a sphere.
.. raw:: html
So we assume that the earth is round. To make it flat, we put an
imaginary cylinder around it, unfold it, and then cut it to make it look
square:
.. raw:: html
There are hundreds of ways to display the Earth’s surface in a plane,
each with its advantages and disadvantages, which is just one of them.
Now let’s **assume** the world is a square:
.. raw:: html
When the zoom level is 0, it represents the world, and its width and
height are both 256 pixels. When we move to the next zoom level, its
width and height are doubled and can be represented by four 256-pixel by
256-pixel images:
.. raw:: html
At each zoom level, each tile is divided into four, the size (the length
of the edge given by the ``tileSize`` option) doubles, and the area is
increased by a factor of three.
.. raw:: html
Notes on proportions
--------------------
One of the disadvantages of using a cylindrical projection is that the
scale is not constant and the measurement distance or size is not
reliable, especially at low zoom levels.
Translate the equator to 60° north latitude by adding a
``L.Control.Scale`` to the map. We can see how the scale factor is
doubled. The following example uses a JavaScript timeout to automate:
::
L.control.scale().addTo(map);
setInterval(function(){
map.setView([0, 0]);
setTimeout(function(){
map.setView([60, 0]);
}, 2000);
}, 4000);
.. raw:: html
``L.Control.Scale`` displays the scales that apply to the center point
of the map. At relatively high zoom levels, the scale changes are not
obvious.
Control zoom
------------
A leaflet map has several ways to control the zoom level it displays,
but the most notable is ``setZoom()``. For example, map.setZoom(0) sets
the zoom level of ``map`` to ``0``.
This example again uses the timeout to automatically alternate between
zoom levels 0 and 1:
::
setInterval(function(){
map.setZoom(0);
setTimeout(function(){
map.setZoom(1);
}, 2000);
}, 4000);
.. raw:: html
Other ways to set the zoom:
- ``setView(center, zoom)`` , It also sets the center of the map
- ``flyTo(center, zoom)`` , Similar to ``setView``, but it has
smooth animations
- ``zoomIn()`` / ``zoomIn(delta)`` , Zoom in to the ``delta`` zoom
level with a default zoom level of ``1``
- ``zoomOut()`` / ``zoomOut(delta)`` , Reduce the ``delta`` zoom
level with a default zoom level of ``1``
- ``setZoomAround(fixedPoint, zoom)`` , Set the ``delta`` level
while maintaining a fixed point (scroll mouse wheel zoom)
- ``fitBounds(bounds)`` ,Automatically calculate scaling to match
rectangular areas on the map
Fractional scaling
------------------
Fractional scaling is a new concept proposed in Leaflet 1.0.0. Prior to
this, the map’s zoom level can only be an integer (0, 1, 2, etc.), but
scores like 1.5 or 1.25 can now be used.
Fractional scaling is disabled by default. To enable it, use the MAP’s
``zoomSnap`` option. The default value for the ``zoomSnap`` option is 1
(which means the zoom level of the map can be 0, 1, 2, etc.).
If you set the value of ``zoomSnap`` to ``0.5``, the effective zoom
level for the map will be ``1``, ``1.5``, ``2``, etc.
If the setting is ``0.1``, the effective zoom level for the map will be
``0``, ``0.1``, ``0.2``, ``0.3``, ``0.4``, etc.
The following example uses the ``zoomSnap`` value as ``0.25``:
::
var map = L.map('map', {
zoomSnap: 0.25
});
.. raw:: html
As you can see, Leaflet only loads tiles with a zoom level of ``0`` or
``1`` and Need to scale them.
The Leaflet will zoom to the most recent one. For example, if you have
``zoomSnap: 0.25``, you try to do ``map.setZoom(0.8)`` and the zoom will
return To 0.75.
There is another important map option related to ``zoomSnap``:
``zoomDelta`` option. It controls the zoom level of the image when using
the zoom button (from the default ``L.Control.Zoom``) or the +/- keys on
the keyboard.
For scrolling mouse wheel zoom, the ``wheelPxPerZoomLevel`` option
controls the zoom speed of the mouse wheel.
Here’s an example where ``zoomSnap`` is set to zero:
::
var map = L.map('map', {
zoomDelta: 0.25,
zoomSnap: 0
});
Try the following to see how the zoom level changes:
- If you have a touch screen, please pinch the zoom
- Zoom with the mouse wheel
- Make a box zoom (hold the ``shift`` key on the keyboard while
dragging the mouse)
- Use the zoom button
.. raw:: html
This tutorial is over. Now show your zoom level on the map!
